BuildMyMTB
Prototype - Evolving Daily

Industry Nine Triad AL 1/1 29 Super Boost (Rear, XD, 6-Bolt) Rear Wheel

What the checker says69will not fit

Run variant by variant through the e-MTB builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.

Checked against 469 verified e-MTB parts in this catalog. 374 produced no finding of any kind.

Will not fit

  • Will not fiterror · Rear RotorRear rotor interface mismatch: Center Lock rotor on 6-bolt rear hub - no adapter exists for this direction. On 22 of the 41 verified rotors in this catalog.
  • Will not fiterror · Front WheelWheel combination is not a real configuration: 275 front with 29 rear. Mixed wheels run 29in front and 27.5in rear (mullet), never the other way round. On 8 of the 24 verified front wheels in this catalog.
  • Will not fiterror · ForkWheel combination is not a real configuration: 275 front with 29 rear. Mixed wheels run 29in front and 27.5in rear (mullet), never the other way round. On 6 of the 19 verified forks in this catalog.
  • Will not fiterror · Front TireWheel combination is not a real configuration: 275 front with 29 rear. Mixed wheels run 29in front and 27.5in rear (mullet), never the other way round. On 3 of the 17 verified tires in this catalog.
  • Will not fiterror · Rear TireRear wheel size mismatch: Rear wheel = 29, Rear tire = 275. Everything at one end of the bike must share a wheel size. On 3 of the 17 verified tires in this catalog.

Emtb freehub, Cassette. 41 more findings from the same check, on up to 1 of the 58 verified cassettes each.

Emtb rear axle, Frame. 15 more findings from the same check, on up to 1 of the 16 verified frames each.

Emtb wheel size, Frame. 8 more findings from the same check, on up to 1 of the 16 verified frames each.

Open a variant in the builder to see the ones that apply to your own parts.

The checker compares the dimensions listed in what we check, and what we don’t. “No conflicts found” means no conflict among those dimensions — not a guarantee that a build works. Errors mean it won’t fit; warnings mean it works but check; infos are notes.

$399.50 MSRP

What the maker states

Wheel
Built for a 29" wheel
Freehub
/ driver SRAM XD
Rotor mount
6-bolt
Internal width
Internal rim width 30 mm
Hub
Spacing 157x12
The rest of what the maker states6 not published

6 further fields the checker looks for are not published by Industry Nine, so we leave them blank rather than estimate them, and those 6 checks stay silent on this rear wheel. They are maximum tire, maximum tire mm, maximum tire basis, minimum tire, e approved and maximum system weight. Each is recorded as “not stated by the maker (not checked)”.

Source: the maker’s page. Last checked 2026-08-01.

Checked against

The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.

6 of 269 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.

Where this sits

All Industry Nine rear wheelsOpen a variant in the builder to see the ones that apply to your own parts